NOTE: The services below do not include test fire or the cost of parts.

Current Turnaround Time = 2 Days
After All Parts Have Been Received

• Inspection / Troubleshooting / Repair: $39.⁹⁹
  Cost does not include parts, if applicable

– Inspection:

 General inspection to ensure proper function.

– Troubleshooting:

 If your AR is not functioning properly, and you’re having trouble figuring out what the problem is.

– Repair:

 Fixing or replacing any damaged parts to restore proper function.

• Miscellaneous Disassembly/Assembly: $39.⁹⁹

If you do not have the tools needed, or required, to have individual parts removed, changed, or installed on your upper receiver and/or lower receiver, or you would like our gunsmith to handle the process. This includes but is not limited to, a barrel, gas block, gas tube, muzzle device, handguard(s), buffer tube, ejection port cover, forward assist, magazine catch, bolt catch, the fire control group, etc.

• Upper Receiver Services: $39.⁹⁹

– Disassembly: 

 Remove parts including the barrel, gas block, gas tube, muzzle device, handguard(s), ejection port cover, and forward assist.

– Assembly:
If you do not have the tools needed or required to assemble your upper receiver, or you would like our gunsmith to handle the build process. This includes checking headspace to confirm proper function. If you want it to be test-fired on your lower receiver you must provide it or have it built at the same time.
This service does not include pinning the gas block to the barrel or accurizing.
 Parts Required:
> Upper Receiver
> Forward Assist Assembly (if applicable)
> Ejection Port Cover Assembly
> Barrel
> Gas Tube
> Gas Block
> Muzzle Device
> Handguard (Rail System)
> Bolt Carrier Group (BCG)
> Charging Handle

• Lower Receiver Services: $39.⁹⁹

– Disassembly:

 Remove parts from the lower receiver.

– Assembly:
If you do not have the tools needed or required to assemble your lower receiver, or you would like our gunsmith to handle the build process. If you want it to be test-fired on your upper receiver you must provide it or have it built at the same time.
Parts Required:
> Lower Receiver
> Buffer Tube Assembly
> Stock
> Lower Parts Kit
> Trigger

• Test Fire: $29.⁹⁹ (includes the cost of ammunition)

Let Us Build Your Custom AR

Building an AR is becoming more and more common and will most often give you a better firearm. Not only does it cost less than purchasing the rifle already completed, but the best thing is you get to pick what parts are installed rather than purchasing a completed rifle just to spend more money and change specific parts that you want more customized. You can purchase and provide us with the main components such as the lower receiver, upper receiver, barrel, etc. or we can work with you in a FREE consultation to decide which parts you want to be installed and order them for you.

• Complete AR Build: $79.⁹⁹

 Parts Required:
– Upper Receiver
– Upper Receiver Parts Kit
> Forward assist assembly (if applicable)
> Ejection port cover
> Ejection port cover pin,
> Ejection port cover spring
> Ejection port cover snap ring
– Barrel
– Gas Block
– Gas Tube
– Muzzle Device
– Handguard (Rail System)
– Bolt Carrier Group (BCG)
> Bolt carrier
> Bolt, ejector, ejector spring. ejector roll pin, extractor, extractor pin, extractor spring with buffer, extractor spring O ring
> Firing Pin, firing pin retaining pin
> Cam pin
> Three gas rings (for direct impingement)
– Charging Handle
– Lower Receiver
– Buffer Tube
– Buffer
– Buffer Spring
– Stock / Pistol Brace
– Lower Receiver Parts Kit
> Takedown pin, takedown detent, and takedown spring
> Pivot pin, pivot detent, and pivot spring
> Bolt catch, bolt catch buffer, bolt catch spring, and bolt catch roll pin
> Magazine catch button, magazine catch body, and magazine catch spring
> Buffer retainer and buffer retainer spring
> Trigger guard and trigger guard roll pin
> Trigger, trigger pin, and trigger spring
> Disconnector, and disconnector spring
> Hammer, hammer pin, and hammer spring
> Safety selector, safety selector detent, and safety selector spring
> 4-40 set screw (for threaded takedown pin detent hole)
> Pistol grip, pistol grip screw, and pistol grip lock washer
> Any additional part(s) needed to complete the lower receiver

An appointment is required. We Do Not Accept Walk-Ins