Firearm Services

We offer multiple firearm services. If you own a Glock pistol, our certified Glock Armorer will exceed your expectations. We ensure your Glock is properly maintained and clean to keep it working as it should. We provide detailed cleaning, replacement of worn and broken parts, and we can install upgraded performance-enhancing parts to customize it the way you want.

Firearm Transfers

Transfer Fees

Handguns/Rifles/Shotguns:

$20.00 (First Firearm)
$15.00 (Each Additional Firearm)
LE/Mil/Vet/EMS receive a $5.00 discount

NFA Complete Service Package:

$75.00* (First NFA Firearm)
$40.00 (Each Additional NFA Firearm)
$40.00 (Each Additional Person)
*Select the link below to see everything included in the package.
LE/Mil/Vet/EMS receive a $10.00 discount

Background Check Fee

$7.50
FREE For Utah Concealed Firearm Permit Holders

Glock Full-Service Package

$99.99

Get a detailed inspection and cleaning of your Glock pistol by our certified Glock Armorer and replacement of all springs and pins that wear down over time from shooting.

Firearms operate just like a vehicle. They need to have an oil change, the brakes and tires need to be inspected and replaced. Your firearm is the same way. There is no way to know when a component will fail on any firearm. Glock recommends a full-detailed inspection and replacement of springs be completed annually or every 5,000 rounds. It’s best to replace parts before you believe there is a need to do so! Otherwise, you will suffer an inconvenient or possibly life-threatening failure while training or defending your life. It’s not a question of “if it may fail”, but when WILL it fail?.

The price shown above includes the cost of all Glock factory Original Equipment Manufacturer (OEM) replacement parts.
Parts not in stock will need to be ordered which will cause a longer turnaround time. We are happy to install compatible aftermarket parts for you. However, you must provide all aftermarket parts.

Current Turnaround Time = 1 Day

Handgun Sight Installation

Front & Rear Sights

$29.99 (per firearm)

  • This does not include the cost of the sights. You can purchase and bring us your own compatible sights, or we can order the sights for you which will cause a longer turnaround time.

Mounting Red Dot Sight

$19.99 (per firearm)

  • Must Have A Precut Slide
  • This does not include the cost of the sight. You can purchase and bring us your own compatible sight, or we can order the sight for you which will cause a longer turnaround time.
  • The cost above does not include zeroing the sight.

Current Turnaround Time = 24 Hours (1 Day)

See our Glock parts and costs list.

Glock Inspection & Troubleshooting

$39.99 /Hour

Are you experiencing a lot of malfunctions or having other problems with your Glock?

If so, we can inspect and check your pistol to ensure there are no damaged or broken parts causing issues.
To properly troubleshoot problems such as malfunction diagnosis, you must provide at least two (2) magazines [especially if the magazines are causing issues]. To ensure the issues have been properly fixed, your firearm may have to be test-fired. If test firing is required, you must provide a 50-round box (minimum) of factory new ammunition. If no ammunition is provided, you will be responsible for the cost of ammunition used.

  • The cost above only covers labor. It does not include costs for replacement parts, if necessary.

Current Turnaround Time = 72 Hours (3 Days)

See our Glock parts and costs list.

Glock Builds

Let Us Build Your Custom Glock

Building a Glock from the ground up has its benefits. Not only does it cost less than purchasing the Glock already completed, but the best thing is you get to pick what parts are installed rather than purchasing a completed Glock just to spend more money and change specific parts that you want more customized. We can build the pistol using Glock factory Original Equipment Manufacturer (OEM) parts, or use compatible aftermarket parts. You can purchase and provide us with the main components such as the frame, slide, barrel, and recoil spring or we can work with you in a FREE consultation to decide which parts you want to be installed.

  • OEM parts not in stock, compatible aftermarket parts, or main components that are not provided for the build will need to be ordered which will cause a longer turnaround time.

Current Turnaround Time = Varies Due To Customization

See our Glock parts and costs list.

Firearm Cleaning

Handguns

  • Basic Cleaning: $24.99 (per firearm)
  • Detail Cleaning: $39.99 (per firearm)

Rifles/Shotguns

  • Basic Cleaning: $44.99 (per firearm)
  • Detail Cleaning: $69.99 (per firearm)

Current Turnaround Time = 24 Hours (1 Day)

Minimum 4 characters